What "renewable-powered object storage" means, and how we report it

Green claims in hosting are easy to make and hard to check. This article sets out exactly what our renewable energy claim covers, what it does not, how the CO2 and tree figures in your console are calculated, and where every number comes from.

By Wow Magic team · · 4 min read

Every hosting provider has a sustainability page. Most of them are adjectives. We would rather be specific about what we claim, how the numbers on your Impact page are computed, and which parts of the picture we do not yet measure. If you are evaluating storage providers on environmental grounds, this is the article to read.

The claim, precisely

Our renewable claim applies to the electricity consumed by the storage infrastructure in our regions: servers, cooling and networking equipment. In greenhouse-gas accounting terms this is Scope 2, the purchased electricity.

It is reported per region, not as a single marketing number. Each region on the regions page lists the renewable source its facility reports (for example offshore wind, or hydro and solar) and a renewable percentage. The platform-wide figure shown on the sustainability page is the lowest percentage among the regions that are currently available, never an average. If we open a region that cannot match the others, the headline number goes down until it can. A region that is announced but not yet available does not count at all.

What the claim does not cover:

  • Embodied carbon (Scope 3): manufacturing the drives, servers and buildings. We do not currently measure it and we do not net it off against anything.
  • Network transit between our facilities and your users. Those are other companies' networks and grids.
  • Your own infrastructure reading and writing the data.

We think this is the honest boundary. A storage service that claimed to be "carbon neutral" including all of the above, with no published method, would be making a claim it could not substantiate.

How the figures on your Impact page are calculated

Your console has an Impact page with three numbers. Here is where each one comes from. All the factors are platform configuration values, exposed by the public GET /platform/config API, and editable by our staff with an audit trail, so if a factor changes you can see when.

Trees funded

We fund the planting of a fixed number of trees for every terabyte you store, per month. The current factor is shown on the sustainability page and the pricing estimator (at the time of writing it is one tree per TB-month). Your figure is simply:

trees = stored capacity (TB) × trees-per-TB-month, accumulated monthly

Storing 10 TB for a year therefore funds 120 trees at the current factor. The figure on your Impact page accrues monthly from your average stored capacity; it counts what has accrued for your account, not projected future totals.

CO₂ avoided

This is an estimate and is labelled as one. We compare the renewable electricity used to store your data with what a typical grid-powered data centre would emit for the same capacity, using a baseline expressed in kilograms of CO₂ per terabyte per month:

CO₂ avoided (kg) = stored capacity (TB) × baseline kg CO₂ per TB-month

The baseline is a platform configuration value published on the sustainability page and returned by the config API, so it is not buried in this article where it could go stale. It is a deliberately simple model: it does not vary by region grid mix, by drive type or by how often you access the data. We prefer a transparent simple figure to a precise-looking complex one we cannot defend.

Indicative uptake of funded trees

To help relate trees to CO₂ we also show a rough annual uptake per mature tree. We use approximately 22 kg of CO₂ per tree per year, from the Arbor Day Foundation, and we always say "roughly" and "when mature": a newly planted tree takes years to reach that rate, so this is not a claim about this year.

Why not buy certificates and call it 100%?

Because the point of the claim is the electricity actually powering the disks. Where a facility supplies renewable electricity we show the source it reports; we do not paper over a fossil-powered site with unbundled certificates and describe it as green. When a region's facility cannot report a renewable source, the region's percentage says so, and the platform headline drops to match.

Efficiency, briefly

Renewable supply is one half; using less is the other. Our regions use high-density storage nodes chosen for capacity per watt, and where a facility offers it, waste heat is reused for district heating. We note this per region rather than as a blanket statement because it is only true where it is true.

How to check us

  • The factors: GET /platform/config on your account's API host returns the trees-per-TB and CO₂ baseline values used for every calculation.
  • The regions: GET /platform/regions and the regions page list each region's country, availability and renewable source.
  • The method: the sustainability page states the same boundaries as this article, including what is excluded.

If you need these figures for your own reporting, the Impact page in the console charts your account's trees funded and CO₂ estimate month by month, derived from your average stored capacity, and the values can be reproduced from the formulas above.